Aspock Trailer light plug in systems

 Aspock are one of the leading light manufacturers for Trailers used by a lot of manufacturers as original equipment.
These lights are one of the better quality lights but spare parts ie lenses are very expensive (almost as expensive as the light itself).
Aspock have an expandable Plug in system available that means that there is no need for junction boxes.
This is trailer light wiring made easy.
The Aspock system also makes Maintance and repairs easy.
The Aspock system starts with a trailer plug with 2 cables to supply the rear lights.

Front of aspock trailer light cable

Front of aspock trailer light cable


Most Aspock rear trailer lights have a 5 pin Bayonet connection / socket on the back of them, shown on the image below.
Aspock 5 pin Bayonet socket

Aspock 5 pin Bayonet socket


The 5 pin plug is designed for a cable like the one shown below to be plugged in.
Aspock 5 pin Bayonet plug

Aspock 5 pin Bayonet plug


Aspock also offer cables with a DC-Flat Cable that comes out of the back of the plug (shown below)
Aspock 5 pin Bayonet plug with additional DC-Flat cable

Aspock 5 pin Bayonet plug with additional DC-Flat cable


The DC-Flat cable comes with sealed (over moulded ) on the end to stop water penetrating and corroding the cable inside.
Sealed end of Aspock marker light DC-Flat cable

Sealed end of Aspock marker light DC-Flat cable


The DC-Flat cable supplies power from your rear lights for marker lights and number plate lights to be added.
This cable joins to other DC-Flat cables on lights or an extension cable using an Aspock DC connector (shown below)
Aspock DC connector

Aspock DC connector


The Aspock DC Connector clicks shut on 2 cables giving a water tight connection on to the 2 cables. Image below shows a connector Ready to Click shut on 2 cables.
Aspock DC connector shown on 2 DC-Flat cables

Aspock DC connector shown on 2 DC-Flat cables


Once the DC Connector is clicked shut pins inside penetrate the cables giving an electrical connection between the cable and small silicon seals around the pins keep the connection water tight.
This process can be repeated to add extension cables + additional lights.
Spare parts are available for the Aspock system such as plugs and sockets with single and double grommets to make adaptors to run more than 1 rear light and various length main cables and DC-Flat cables to make a bespoke wiring loom for your trailer.
The DC-Flat cable can be purchased separately to run Aspock marker lights from other lights
The DC-Flat cable is a fast and simple way to add additional marker lights to your trailer.
To purchase Aspock Lighting equipment please go to our Aspock Trailer light section on our Ecommerce shop.