Posts Tagged "fitting"

Replacing trailer brake cable cover plates

Cable cover plates form a protective cover for the exposed area of brake cable that connects to the expander in the brake. The cable cover is made up of two plates that slot together and are held in place by the brake cable itself. The first of these two plates is permanently fixed to the […]

Triple lock head fitting/replacment guide (Braked coupling)

Here is a guide to fitting / replacing a triple lock head on a braked coupling. First of all you will have to remove your old coupling head. If you have a standard coupling head you should be able to remove it by undoing the two bolts that fasten it to the drawbar. If you […]

Trailer wheel bearing replacement / fitting guide

Here is a guide that will help you install trailer wheel bearings. Trailer wheel bearings can become damaged or worn out over time just like any other, so it is important that you remember to maintain them. Wear and tear through regular use is a gradual process, but you can cause unnecessary damage through two […]