Posts Tagged "instructions"

Adjusting Knott Brakes

This guide is for adjusting Knott trailer brakes. When adjusting brakes you must always start from the Wheel and work forwards. Adjusting Knott Brakes Note-Before beginning your Brake Adjustment it is important to strap your handbrake down onto your Coupling. Or, with Indespension, insert an M10 Bolt into your Coupling. This is to prevent injury […]

Adjusting Al-Ko Brakes

This guide is for adjusting Al-Ko trailer brakes. When adjusting brakes you must always start from the Wheel and work forwards. Adjusting Al-Ko Brakes Note-Before beginning your Brake Adjustment it is important to strap your handbrake down onto your Coupling. Or, with Indespension, insert an M10 Bolt into your Coupling. This is to prevent injury […]

TEC2M Auto Switch Combi Relay wiring diagram

TEC2M Auto Switch Combi Relay This relay automatically senses the condition of the towing vehicles alternator and diverts some of the current charging it’s battery to the caravan’s battery or fridge as well. This happens automatically when sensors trigger a split charge relay at a set voltage. This does not require a separate lead from […]

Triple lock head fitting/replacment guide (Braked coupling)

Here is a guide to fitting / replacing a triple lock head on a braked coupling. First of all you will have to remove your old coupling head. If you have a standard coupling head you should be able to remove it by undoing the two bolts that fasten it to the drawbar. If you […]

Brake cable replacement/fitting guide

Here is a guide that will help you replace either Knott or Al-ko detachable trailer brake cables. This guide will illustrate the processes you will have to go through, as well as point out any important information that could prove useful to a trailer owner. First of all, you will have to find a way […]