Replacing a Damper for a Knott Coupling
This guide is to instruct you on the steps for replacing a Knott Damper in a Coupling. Replacing a Knott Damper Step 1 – Remove the Gater (Bellows) from the rear bolt on Coupling as shown below. Step 2 – Remove both front bolts with a 19mm spanner, to remove the Coupling Head Step 3 […]
Back to Top | Comments Off on Replacing a Damper for a Knott Coupling
Adjusting Knott Brakes
This guide is for adjusting Knott trailer brakes. When adjusting brakes you must always start from the Wheel and work forwards. Adjusting Knott Brakes Note-Before beginning your Brake Adjustment it is important to strap your handbrake down onto your Coupling. Or, with Indespension, insert an M10 Bolt into your Coupling. This is to prevent injury […]
Back to Top | Comments Off on Adjusting Knott Brakes
Identifying Trailer Brakes
The 2 main manufacturers of brakes in the UK, these are Knott and Al-Ko. There are 2 other manufacturers which are used in the UK; these are Bradley and BPW (BPW fitted to Graham Edwards Trailers). This guide will help you to indentify Knott and Al-Ko Brakes. Identifying Knott Brakes These can be recognised, without […]
Back to Top | Comments Off on Identifying Trailer Brakes